GAME FISHING TACKLE AUSTRALIA
REELAX ACCESSORIES

REELAX OUTRIGGERS, CHAIRS AND ACCESSORIES

 REELAX … AUSTRALIA'S FOREMOST IN GAME FISHING EQUIPMENT.

FOR MORE THAN 40 YEARS REELAX HAS BEEN SYNONYMOUS WITH FIRST QUALITY SPORT AND GAME FISHING EQUIPMENT  INCLUDING OUTRIGGERS, GAME CHAIRS, ROD HOLDERS AND A UNIQUE RANGE OF REELAX HELM AND PASSENGER CHAIRS. REELAX EQUIPMENT HAS BEEN TESTED IN EVERY SOUTH PACIFIC FISHING GROUND ON MANY OF AUSTRALIA'S FOREMOST PROFESSIONAL AND RECREATIONAL FISHING VESSELS.

!

REELAX GAME CHAIR HARNESS

REELAX GAME CHAIR HARNESS

REELAX GAME CHAIR HARNESS is an angling aid for heavy tackle game chairs. The angler is seated in the harness and is connected to the rod via 316 stainless chain supports. The chain supports are adjustable using quick connect cast spring hooks. Protective chain support covers prevent any damage to the game chair if contact were to happen. The Reelax Chair Harness has a laminated glass composite frame which is encased by a 50mm x 1.00mm stainless strap. The stainless strap has heavy duty D-Rings attached where the chain supports connect. The bottom pad is adjustable to allow the angler to position the harness higher or lower. Low friction marine PVC aids the slide angling technique while the internals of the Reelax Chair Harness are molded with a breathable marine grade canvas. The heavy duty vinyl out back is precisely shaped and piped to the canvas internals. Custom embroidery is available on request.

 

REELAX GUNNELL MOUNT OUTRIGGER BASES

REELAX GUNNELL MOUNT OUTRIGGER BASES

REELAX GUNNELL MOUNT BASE is hugely popular  for outriggers designed for deck, cabin or fly-bridge mounting on just about any size boat. Thanks to unique Reelax slotted spline, they are infinitely adjustable, with 20 positions on the spline. The whole concept works on the KISS principle. There is nothing to unclip, fold down, undo or screw. The crew person just takes the outrigger pole, lifts the rigger momentarily to the desired trolling or traveling position and slots it back down home. It is so easy. Recommended for use with 4.5 meter poles. Tube diameter 44mm.

 

  •  PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

REELAX T TOPPER OUTRIGGER BASES

REELAX T TOPPER OUTRIGGER BASES

REELAX T-TOPPER MOUNT BASE is a light to medium tackle (up to and including 24kg – 50lb) trolling outrigger base. Best suited for trailer boats, the Reelax T-Topper can be mounted to the horizontal surface of a T-Top, cabin roof, top side coaming or gunnels. Cabin side or targa side vertical mounting makes the Reelax T-Topper the most versatile outrigger base available. The index adjustment allows pole angles from vertical to horizontal with increments of 11.25 degrees (8 adjustments). The index adjustment is supported by a rear plate that is an integral part of the casting and takes the load of side to side movement from the pole. The boss fitting that straddles the index plate has reinforced support ribs as an integral part of the casting also to take the loads of side to side movement from the outrigger pole. The spline fitting allows the spread of the outrigger poles to be adjustable. Both index adjustment and spline adjustment come with 5/16 diameter - 316 stainless ball locking pins and are available separate on request. To keep the Reelax T-Topper securely connected to its mounting point it comes fitted with stainless safety halyards with cast spring hooks and deck eyes. The Reelax T-Topper mounting post is reversible and can be flush or hole mounted. All castings and tube (44mm x 1.6mm) is mirror polished 316 stainless. Fasteners are 316 stainless. Simple to install 80mm diameter reversible mounting post x 4 bolt holes.

 

  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

REELAX REEF 450 OUTRIGGER BASES

REELAX REEF 450 OUTRIGGER BASES

REELAX REEF 450 OUTRIGGER BASE are a light to medium tackle (up to and including 24kg) trolling outrigger base. Best suited to trailer boats and fly bridge cruisers up to 28 foot or 8.5m. Ease of operation is a feature of the Reelax Reef 450. Just pull the ¼ detent stainless ball locking pin from the hold up bracket and lay the rigger into a trolling position. All castings and tube (44mm x 1.6mm) is mirror polished 316 stainless. Fasteners are 316 stainless. Reelax Reef 450 bases can be mounted to an area of 300mm x 300mm. Nylon Packing feet (10mm) is available on request. Maximum pole length to be fitted is 5.5 meter Replacement ¼ detent stainless ball locking pins are available on request. Fitting instructions supplied.

 

  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

REELAX JUNIOR - MINI - MAXI OUTRIGGER BASES

REELAX JUNIOR - MINI - MAXI OUTRIGGER BASES

REELAX - JUNIOR - MINI - MAXI OUTRIGGER BASES are a heavy tackle up to and including 60kg  130lb outrigger base. Best suited to fly bridge cruisers. The scissor arm design of the Reelax base spreads the mounting area load and allows for pole lengths up to and including 6.5 meters. A stainless steel ring locks the rigger base in a traveling position. To deploy the rigger simply elevate the locking ring and lay the rigger into a trolling position. All castings and tube (50.8mm x 1.6mm) is mirror polished 316 stainless. Fasteners are 316 stainless. Nylon Packing feet (10mm) are available on request. Rigger retraction ropes available on request. Main stay of riggers can be pinned so rigger can be deployed flat for bridge clearance. Custom sizes are available on request. Fitting instructions supplied.

 

  • JUNIOR 600 - $1,715.00 PAIR
  • JUNIOR SERIES 1000 - $1,755.00 PAIR
  • MINI 1000 - $2,399.00 PAIR
  • MAXI 2000 - $2,999.00 PAIR
  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

REELAX CENTER RIGGER BASE

REELAX CENTER RIGGER BASE

REELAX CENTER RIGGER BASE is an adjustable base that allows a fifth line to be trolled at a central position in a trolling pattern or lure spread. 3 adjustments (15, 30 and 45 degrees) available just pull the 1/4 detent stainless ball locking pin. Suits a 3 meter shotgun pole. All castings and tube (44mm x 1.6mm) are mirror polished 316 stainless. Fasteners are 316 stainless. Mounting feet need to be mounted 150mm apart to get correct angles.

 

  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

REELAX DELUXE SHOTGUN RIGGER BASE

 REELAX DELUXE SHOTGUN RIGGER BASE

REELAX DELUXE SHOTGUN RIGGER BASE is an adjustable base that allows a fifth line to be trolled at a central position in a trolling pattern or lure spread and can be mounted an a horizontal or vertical surface. The index adjustment allows pole angles from vertical to horizontal with increments of 11.25 degrees 8 adjustments. The index adjustment is supported by a rear plate that is an integral part of the casting and takes the load of side to side movement of the pole. The boss fitting that straddles the index plate has reinforced ribs as an integral part of the casting also to take the loads of side to side movement of the outrigger pole. Reelax Deluxe Shotgun comes with a 5/16 diameter 316 stainless ball locking pin. To keep the Reelax Deluxe Shotgun securely connected to its mounting point it comes fitted with stainless safety halyards with cast spring hooks and deck eyes. Simple to install 80mm diameter mounting plate x 4 dolt holes. Suits 3 meter shotgun pole.

 

  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

REELAX OUTRIGGER POLES

REELAX OUTRIGGER POLES

REELAX OUTRIGGER POLES are 2 piece ferruled poles. Solid locking and separating blank and suits tube diameters of 41mm I.D (inside diameter). Poles are coated in flexible 2 part Marine Hardened Enamel for years of UV protection and available in black or white.

  • SHOTGUN RIGGER POLE 3M - $340.00
  • OUTRIGGER POLE 3.0M - $670.00 PAIR
  • OUTRIGGER POLE 4.5M - $755.00 PAIR
  • OUTRIGGER POLE 5.5M - $1215.00 PAIR
  • OUTRIGGER POLE 6.0M - $1425.00 PAIR
  • OUTRIGGER POLE 6.5M - $1950.00 PAIR
  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

REELAX OUTRIGGER RIGGING KIT

REELAX OUTRIGGER RIGGING KIT

REELAX OUTRIGGER RIGGING KIT consists of all the components required to rig 1 pair of outrigger poles.Complete kit for a pair of outriggers,assembled by Reelax. All fittings are high quality. Includes eye bolts, saddles, shock cords, 2 x blacks release clips, strong snap swivels, 40m 500lb black nylon and stainless steel clips and pulleys.

 

  •  REELAX OUTRIGGER RIGGING KIT - $369.00
  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS.

 

REELAX SHOTGUN RIGGING KIT

REELAX SHOTGUN RIGGING KIT

REELAX SHOTGUN RIGGING KIT is used for eliminating dropback or line slack once a fish strikes a lure. It is used to rig a halyard and tag line to the Reelax shotgun pole. The Reelax shotgun kit consists of a 316 stainless tag line return with rubber bumpers which prevent damage to the shotgun pole if the return were to come in contact. Cork balls are also supplied as stoppers for the stainless return. The cork balls prevent the return weight from jamming on the snap swivels connecting the halyard line, also preventing damage to the stainless pulley on the Reelax snubber. Rosco 851-4/0 USA black coast lock snap swivel is used at the top of the tag line to connect to the bottom of the halyard connect swivels. Dacron (not included) should be spliced onto the end of the tag line for connection to the main line via a rubber band. Aluminum crimps are supplied to connect the Rosco 851-4/0 USA black coast lock snap swivels to tag line and halyard. The Reelax shotgun kit uses solid 2.00mm monofilament which has black pigmentation for U.V protection and stability. 

  • REELAX SHOTGUN RIGGING KIT - $139.00
  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS

REELAX HEAVY DUTY ROD HOLDERS

REELAX HEAVY DUTY ROD HOLDERS

REELAX HEAVY DUTY ROD HOLDERS are a heavy tackle flush mounted rod holder. Suits line class up to and including 60kg or 130lb. Top castings are investment cast 316 stainless electro polished then mirror polished. Tops are full TIG welded to 50.8 x 1.6mm tube 316 stainless. Reelax Heavy Duty Rod Holders come complete with sealing caps and mounting gasket. Available in 30 degree angled to suit straight butt rods or 90 degree straight to suit bent butt rods. Stainless drains available for sealed coamings. Rod extenders and Rod Swivels are also available to suit this product.

  • REELAX ROD HOLDERS 30 DEGREE ANGLE - $125.00
  • REELAX ROD HOLDERS STRAIGHT - $138.00
  • PLEASE NOTE: 10 DAYS LEAD TIME FOR MOST REELAX PRODUCTS

REELAX LIVE BAIT TUBES

REELAX LIVE BAIT TUBES

REELAX LIVE BAIT TUBES prevent line tangling from swimming rigged baits. Simply drop Reelax Live Bait tubes in to existing straight rod holders and plug in a raw water deck wash to keep baits in tip top condition. Tubes sit out board or in board. Mirror polished 316 stainless. Also available mounting options to game chair pedestals. 38mm mounting arm is detachable for storage and is 4 way gimbled. Tubes are 76mm diameter mirror polished stainless 330mm in length. Tube inlet suits standard 25mm tap fitting.

 

  • REELAX LIVE BAIT TUBES - $499.00
  • PLEASE NOTE: DUE TO FREIGHT COST VARIATIONS PLEASE ORDER VIA PHONE OR E-MAIL FOR ACCURATE FREIGHT ASSESSMENT.